Rope pulley

Hanging Pulleys to get Rope-For Horizontal Pulling
Hang these pulleys from hooks, screws, and bolts to aid with horizontal pulling or even to guide a rope.
Pulleys with two grooves are for use where multiple pulleys move an individual load, such as for example block and tackle systems. They metric gear rack china require about 50 % the pressure of a single-groove pulley to go the same load.
Pulleys with a bearing are easier to switch than pulleys without a bearing.
Acetal, nylon, and aluminium are lightweight and corrosion resistant. Stainless is the most corrosion resistant.
Designs C, D, and J possess a bracket on underneath for tying off a single end of a rope.
Style K decrease the force needed to keep your load in place. Unlike standard pulleys, these possess a V-groove for more grasp on your rope, plus they ratchet when under load so they won't slip in the various other direction. Pulley for3/8″ dia. rope could be arranged to ratchet even though not under load.
Mounted Pulleys for Rope-For Horizontal Pulling
Install these pulleys to a flat surface to aid with horizontal pulling or to guide a rope.
Pulleys with a bearing are easier to change than pulleys without a bearing.
Aluminium and nylon are lightweight and corrosion resistant. Stainless steel has the most corrosion resistance.
Pulleys for Rope-For Horizontal Pulling
Also referred to as sheaves, use these pulleys to assist with horizontal pulling or to guide a rope.
Pulleys with a bearing are simpler to change than pulleys without a bearing.
Acetal and aluminum are light-weight and corrosion resistant. Galvanized steel is certainly more corrosion resistant than iron and metal. Stainless steel may be the most corrosion resistant.
Easy-Open Hanging Pulleys for Rope-For Horizontal Pulling
Also referred to as snatch blocks, these pulleys open so it is easier to feed the rope through the housing-a totally free rope end isn't needed. Use them to assist with horizontal pulling or to guide a rope.
Pulleys with a bearing are easier to turn than pulleys with out a bearing.
Aluminum is more light-weight than stainless steel. Stainless steel can be more corrosion resistant than aluminum.
Pulleys for Wire Rope-For Horizontal Pulling
Also called sheaves, use these pulleys to assist with horizontal pulling or to guide a rope.
Pulleys with a bearing are simpler to change than pulleys without a bearing.
Acetal and nylon are lightweight and corrosion resistant. Stainless may be the most corrosion resistant.
Mounted Pulleys for Wire Rope-For Horizontal Pulling
Mount these pulleys to a set surface to aid with horizontal pulling or to guide a rope.
Pulleys with two grooves are for make use of where multiple pulleys move a single load, such as for example block and deal with systems. They require about 50 % the drive of a single-groove pulley to move the same load.
Pulleys with a bearing are simpler to change than pulleys with out a bearing.
Stainless steel is more corrosion resistant than steel.
Hanging Pulleys meant for Wire Rope-For Horizontal Pulling
Hang these pulleys from hooks, screws, and bolts to aid with horizontal pulling or to guide a rope.
Pulleys with two grooves are for use where multiple pulleys move a single load, such as for example block and deal with systems. They require about 50 % the power of a single-groove pulley to go the same load. They possess a bracket on the bottom for tying off one end of your wire rope.
Pulleys with a bearing are simpler to turn than pulleys with out a bearing.
Nylon is lighter in weight than metal. Aluminum can be corrosion resistant. Stainless may be the most corrosion resistant.
Pulley with carabiner may mount to steel framing or hang in your rigging system.
Easy-Open Hanging Pulleys for Wire Rope-For Horizontal Pulling
Also referred to as snatch blocks, these pulleys open therefore it's simpler to feed the rope through the housing-a free rope end isn't needed. Use them to aid with horizontal pulling or even to guide a rope.
Style D pulleys have a corrosion-resistant stainless housing.
Pulleys for Wire Rope-For Lifting
Utilize the bore to attach these pulleys on a shaft. These pulleys are also known as sheaves.
Pulleys with a bearing are simpler to turn than pulleys without a bearing.
Nylon pulleys are much lighter than steel pulleys.
Warning: Never use to lift people or products over people.
Mounted Pulleys for Wire Rope-For Lifting
Attach these pulleys to a set surface.
Pulleys with two grooves are for use in applications where multiple pulleys move an individual load, such as for example block and deal with systems.They are able to reduce the force had a need to move the load by up to 2 times compared to single-groove pulleys.
Pulleys with a bearing are easier to change than pulleys with out a bearing.
Stainless pulleys are more corrosion resistant that steel.
Style 3 pivots up to 200° for different pull directions.
Warning: Never make use of to lift people or items over people.
Hanging Pulleys intended for Wire Rope-For Lifting
Hang these pulleys from hooks, screws, and bolts.
Pulleys with two grooves are for use where multiple pulleys move an individual load, such as for example block and tackle systems. They require about half the drive of a single-groove pulley to move the same load.
Pulleys with a bearing are simpler to change than pulleys without a bearing.
Style Electronic pulleys have bracket on the bottom that lets you tie off one end of your wire rope.
Warning: Never use to lift people or products over people.
Easy-Open up Hanging Pulleys for Wire Rope-For Lifting
Also referred to as snatch blocks, these pulleys open so it'seasier to feed the rope through the housing-a totally free rope end isn't needed.
Pulleys with two grooves are for make use of where multiple pulleys move a single load, such as block and deal with systems. They require about half the power of a single-groove pulley to go the same load.
Latch kits (sold separately) add a latch to the swiveling hook on Design C to maintain rope secure.
Warning: Never use to lift people or products over people
Hanging Pulleys designed for Rope-For Lifting
Hang these pulleys from hooks, screws, and bolts.
Pulleys with two grooves are used in applications where multiple pulleys move a single load, such as for example block and tackle systems. They are able to reduce the force had a need to move the load by up to 2 times in comparison to single-groove pulleys.
Pulleys with a bearing are easier to switch than pulleys without a bearing.
Style A pulleys possess a bracket on underneath for tying off 1 end of a rope.
Warning: Never make use of to lift people or items over people.
Easy-Open up Hanging Pulleys for Rope-For Lifting
Also known as snatch blocks, these pulleys open so it's simpler to feed the rope through the housing-a free rope end isn't needed.
Warning: Never use to lift people or items over people.